食色软件app下载_食色视频app_食色官方

Welcome to the official website of Shanghai Jibei Air Treatment Equipment Co., Ltd.!
30
ABOUT US
Shanghai Jibei Air Treatment Equipment Co., Ltd. specializes in civil dehumidifiers, commercial dehumidifiers, industrial dehumidifiers, rotary dehumidifiers, explosion-proof dehumidifiers, compressed air dryers, temperature-adjusting dehumidifiers, constant temperature and humidity machines, heat pump dryers R & D and manufacturing of special non-standard dehumidifiers and industrial humidifiers. The company has strong technical force, has a professional R & D and production team, is equipped with advanced automated production lines and product testing equipment, and constantly introduces advanced foreign technology to improve product defects. Product performance is more stable, economic and environmental protection, energy saving and so on. Products have passed ISO9001: 2015 quality management system certification, 3C compulsory product certification, etc. On-site service is available throughout the country, no worries after sale!
Image map
INTRODUCTION
QUALIFICATIONS
Full heat exchange fresh air dehumidifier
working principle of the full heat exchange fresh air dehumidifier: The total heat exchange fresh air dehumidification purification system is an improved air supply and exhaust dehumidification system with heat recovery function based on the two-way flow fresh air system. The air supply and exhaust are completed by a host (two fans), and a heat exchange module is added inside the host, which can quickly absorb and release heat, ensuring sufficient heat exchange between the air, exhausting outdoor air and sending air. The fresh air entering the room is exchanged in this total heat exchange device. When the indoor exhaust air and fresh air flow through the core of the heat exchanger in a crosswise manner, due to the temperature difference and steam partial pressure difference between the air flows on both sides of the air separation plate, When two air flows pass through the partition plate, a heat and mass transfer phenomenon appears, causing a total heat exchange process. The fresh air outside is pumped into the equipment through the primary effect G4 + intermediate effect F7 + ** H13 (HEPA) + negative ion UV sterilization device through the direct expansion type dehumidification fan. When the humid air passes through the heat exchanger, the The water condenses into water and is discharged from the drip tray at the lower part of the evaporator. At the same time, the dry air is delivered to the room. At this time, the dirty air in the room is finally discharged to the outside after heat exchange. This continuous circulation reduces the indoor humidity gradually, and also solves The problem of sweltering indoors and the continuous introduction of fresh air have improved the quality of indoor air and environmental comfort. Features: ☆ Full-automatic fresh air dehumidification, the equipment has 24 hours working characteristics. ☆ One-time installation with level correction function makes installation easier and more convenient. ☆ A heater can be installed at the air outlet of the equipment to further heat the dry air. ☆ The heat exchanger can be washed with water, and the evaporator and condenser are epoxy-coated, which is more resistant to corrosion. ☆ Condensate water has the function of positive pressure drainage, no need to do sinking bend, and greatly reduce the height of the ceiling. ☆ High heat exchange efficiency. The equipment adopts advanced countercurrent structure design, which can greatly improve heat exchange efficiency. ☆ Low noise and high static pressure double-speed or stepless speed-regulating centrifugal fan can meet the adjustment and switching of different air volume and air pressure. ☆ Condensate hot-change core adopts ** internal thread sleeve blue shutters, and condensate pan adopts SUS304 stainless steel. ☆ Equipment can be added and expanded system functions arbitrarily, HEPA ** filtration and negative ion and UV sterilization and purification can be added. ☆ The control function of the forced replacement of the air purification module further improves the quality of air purification and the service life of the product. ☆ The refrigerant filled in the equipment is environmentally friendly R410A or R134A refrigerant, and the compressor is Panasonic or Embraco. ☆ Fresh air purification system integrates fresh air and dehumidification into one system. Less maintenance costs, improved comfort and energy savings. ☆ German intelligent control module fool-type operation, easy to remember after simple setting, comes with R486 communication protocol and intelligent APP. ☆ The shell of the equipment is welded and sprayed from cold rolled sheet metal. The device comes with a self-balanced central fresh air introduction function, and excessive exhaust gas is discharged. ☆ The core program of the device without the intervention of electronic components is integrated in the wire-control operator, which reduces the failure rate of the product and improves the user experience. ☆ The device has the patented design of LUKO **, which makes the temperature of the dry wind sent to the room consistent with the indoor ambient temperature while total heat exchange and air replacement, achieving isothermal air replacement and saving energy. ☆ Two-way ventilation, indoor and outdoor two-way ventilation, equal replacement of fresh air and dirty air, positive and negative pressure operation can be realized according to customer requirements. Fresh air and exhaust air are completely separated to avoid cross infection. ☆ Built-in static heat exchanger, the heat exchange efficiency is more than 80%, and the cooling and heating load (room temperature) is not affected by the fresh air, which greatly reduces the energy required by the fresh air and achieves maximum energy saving. Fresh air full heat exchange bi-directional flow dehumidification and haze purification system parameter table Fresh air double flow dehumidification and haze purification system parameter table (no total heat exchange)
see details
Constant temperature and humidity machine for wine cellar
Product introduction: The wine cellar constant temperature and humidity machine solves the requirements of different wines on the storage environment. By installing a wine cellar-specific dehumidifier, the temperature and temperature required for various wine storage can be freely set. humidity. This improves the higher quality of the wine. Equipment performance characteristics: The energy-saving and environmental protection unit adopts imported brand Panasonic compressors, high-quality EC fans, and reasonable system design to make the whole machine run more energy-saving. The compact and compact body design, reasonable color matching, circular air vents and double doors The hinge structure design makes the whole machine more beautiful to control. ** Stable electrical control components are all international brand products such as Schneider in France. The automatic controller adopts the Italian Carel programmable control system, which has high stability, strong adaptability and control methods. Diversified, simple and flexible operation, independent control or centralized control, configurable communication interface for remote monitoring. The unit's high-performance electronic electrode humidifier has no pollution to the indoor air; there is no special requirement for water quality, and the independent humidifier control board can automatically control the water level and humidification electrode current according to the humidification requirements to achieve high-precision control. Adopting Swiss temperature and humidity sensor and precise valve control logic design, the temperature and humidity control accuracy is higher. The quiet-running unit adopts the ** low-noise EC fan; the structure of the static pressure box, and the inner wall is attached with heat-insulating and sound-absorbing materials, which effectively reduces the noise of the whole machine and achieves quiet operation. The appearance of the whole machine is safe and reliable. The whole metal structure design is adopted. The fireproof insulation material is included. The water pan is made of stainless steel for higher security. Function, the whole machine passes rigorous testing to ensure more stable equipment operation, longer life and convenient installation. The unit is hoisted, and the ultra-thin fuselage design effectively reduces the equipment space occupation rate. The whole machine is installed in the ceiling through a boom. The unit is equipped with lifting ears for easy installation. The air inlet and outlet flanges use a round flange structure for simpler installation. The built-in fresh air electric damper requires no external settings. Convenient, flexible and simple design makes maintenance extremely easy. The inspection door panel adopts a hinge structure, which can be easily opened without removing a screw, and the internal parts are easy to maintain. Equipment parameter table
see details
High temperature dehumidifier
Product introduction of high temperature resistant dehumidifier: The high temperature resistant dehumidifier has the function of dehumidifying at a higher ambient temperature, which solves the problem that the general dehumidifier cannot be used under a higher temperature environment, and expands the use range of the dehumidifier, thereby making the dehumidifier The application field is more extensive. The reserved R485 communication interface can realize the centralized control of the humidity sensor fault self-diagnosis function. The microcomputer automatic defrost is more reliable and accurate. The continuous drainage function of all metal components and electrostatic sprayed sheet metal casing hoses is equipped with universal wheels at the bottom for free movement. Selecting frequency conversion technology can save power by 10%. Core components: Adopt imported brand compressors: brand guarantee, strong power output, high speed, high dehumidification efficiency. The compressor and main accessories are designed to operate normally in different environments through scientific and reasonable design of the refrigeration system. It overcomes the shortcomings of the compressor industry models such as insufficient cooling capacity and dehumidification capacity, the unit frequently starts up and has a high failure rate. At the same time, it improves the product's service life. Blue hydrophilic The two (evaporator & condenser) 0.1mm blue hydrophilic aluminum foil material has fast condensation speed and full copper tube design, which greatly improves the dehumidification efficiency. Aluminum fin hydrophilic film condenser & evaporator, anti-stain cleaning ability, internally threaded copper tube, greatly improving the efficiency of dehumidification. High-quality cooling fan. Strong operation, ventilation and heat dissipation. The effect is remarkable. Turbine centrifugal fan metal shell, durable; strong wind. , Airflow output is bigger and faster. With U-shaped air duct, noise reduction and noise reduction, strong wind greatly improves dehumidification rate. Large circulation air volume is widely used in wood, seeds, tea, aquatic products, medicine, food, edible fungi and other fields. The product has a large applicable area, strong dehumidification, and can strongly remove moisture from materials. It is fast drying, energy-saving, and the whole series is based on the cabinet vertical design. The vertical air from the top can increase air circulation and make the entire place Balanced dehumidification. Equipment parameter table:
see details
Low temperature resistant dehumidifier
Brief introduction of : Low temperature resistant industrial dehumidifier is specially designed for low temperature environment dehumidification (0 ℃ -8 ℃). It adopts optimized system structure design. Under low temperature environment, the moisture in the air condenses faster on the fin surface. The formation of frost layer is more uniform, which solves the problems of low temperature use of traditional dehumidifiers, uneven distribution of frost layers, and slow frost condensation speed. The use of electronic valve cold and hot switching defrost design, the defrost is more rapid, which solves the application of traditional dehumidifier units. In the low temperature environment, the defrost speed is slow and the defrost is not thorough, which causes the dehumidification effect to be not obvious. The characteristics of the unit's rapid defrost and rapid defrost accelerate the dehumidification efficiency in the low temperature space; the unit operates reliably in the low temperature environment. Sex is higher. Performance characteristics: High-sensitivity temperature measurement control panel adopts Schneider components, high sensitivity, stability and reliability. The R485 communication interface is reserved to realize centralized control of humidity sensor fault self-diagnostic function. Microcomputer automatic defrost, more reliable and accurate; all metal components and static electricity Core components of spray-painted sheet metal casing: international brand strong power compressor compressors and main accessories are designed scientifically and rationally through the refrigeration system. The hoses are continuously drained with universal wheels at the bottom. The free movement and the use of frequency conversion technology can save 10% of electricity. Adopting high-quality brands such as Danfoss refrigeration components, four-way reversing valves are suitable for heat pump systems such as central, unit, and room air conditioners. By switching the DC path of the refrigerant, the cooling mode and heating mode can be converted to evaporators and condensation. Aluminum fin hydrophilic film, condenser / evaporator, anti-stain cleaning ability 0.1mm hydrophilic aluminum foil material, fast condensation, greatly improve the efficiency of internally threaded copper pipe, greatly improve the efficiency of dehumidification turbo centrifugal fan with U-shaped air duct , Noise reduction, noise, strong wind greatly improved dehumidification rate large circulation air volume equipment parameter table:
see details
High temperature dehumidifier
Product introduction of high temperature dehumidifier: The high temperature dehumidifier has reached the advanced level at home and abroad after repeated upgrades. It is the third generation of temperature rising dehumidifier with an average thermal efficiency of about 85%. All the series of temperature rising dehumidifiers use centrifugation. The fan uses electricity and a compressor as the heat source, and uses a centrifugal fan to convect the heat exchanger to heat the air. The laminar flow of the hot air passes through the drying pan and transfers heat with the material. It is also equipped with a fully automatic constant temperature control system and a microcomputer control system option. The fully automatic control system can choose the best drying temperature and humidity according to the technological requirements of different products. It completely solves many problems such as long drying time, high temperature and large energy consumption in other drying methods. It has unparalleled characteristics. Performance characteristics: the use of a centrifugal fan, low noise and other characteristics, the material is dried uniformly and quickly. The material does not deform, crack, change color, do not deteriorate, and does not oxidize and dry to protect the color, fragrance and taste of the dry matter more effectively. Easy to operate and effective ingredients, good rehydration after drying, low nutrient loss, and long-term storage period, after setting the parameters, automatic control can be realized, high reliability, less investment, quick results, and can be used to transform the old kiln, garage, etc. It can be migrated and save floor space. It is simple and convenient. Core components: PTC corrugated radiator: PTC radiator uses PTC ceramic heating element and aluminum heat sink. This type of PTC heat sink has the advantages of small thermal resistance and high heat transfer efficiency. This type of automatic constant temperature, power-saving electric heater has a prominent feature: its safety performance is that when the fan fails to stop, the PTC heat sink will not fully radiate, and its power will automatically drop sharply. The temperature is maintained at the Curie temperature (usually around 250 ° C), so that the surface of the electric heating tube heater does not cause "redness", which can cause burns and fire. And other security risks. High-performance compressor: Imported brand compressor: brand guarantee, strong power output, high speed, high dehumidification efficiency. The compressor and main accessories are designed to operate normally in different environments through scientific and reasonable design of the refrigeration system. It overcomes the shortcomings of the compressor industry models such as insufficient cooling capacity and dehumidification capacity, the unit frequently starts up and has a high failure rate. At the same time, it improves the product's service life. Blue hydrophilic Two devices (evaporator & condenser): 0.1mm blue hydrophilic aluminum foil material, fast condensation speed, full copper tube design, greatly improved dehumidification efficiency. Aluminum fin hydrophilic film condenser & evaporator, anti-stain cleaning ability, internally threaded copper pipe, greatly improving the efficiency of dehumidification. Turbo centrifugal fan: metal shell, durable; strong wind, airflow output is larger and faster. With U-shaped air duct, noise reduction and noise reduction, strong wind greatly improves dehumidification rate. Large circulation air volume is widely used in wood, seeds, tea, aquatic products, medicine, food, edible fungi and other fields. The product has a large applicable area, strong dehumidification, and can strongly remove moisture from materials. It is fast drying, energy-saving, and the whole series is based on the cabinet vertical design. The vertical air from the top can increase air circulation and make the entire place Balanced dehumidification. Equipment parameter table:
see details
Air-cooled cooling dehumidifier
product introduction: The cooling dehumidifier has the functions of dehumidification and cooling, but the cooling capacity is not adjustable, which is suitable for dehumidification occasions with large heat and humidity loads and no precision requirements for temperature. Performance characteristics: exquisite structure, simple and reasonable. The structure of the air supply system and the refrigeration system is relatively combined. The air supply system adopts the industrial design of the outer rotor centrifugal fan to achieve the direct exhaust without the need to install fans and pipes. It is particularly suitable for large areas. The warehouse building with a higher storey has stable performance and reliable quality. The compressor also uses a fully-enclosed scroll compressor. Compared with piston compressors, the number of wearing parts is reduced and the liquid compression resistance is strong. However, it cannot achieve temperature adjustment and human control. Optimization Energy saving, strong dehumidification capacity of the unit, high operating efficiency. Configuration of high and low pressure, antifreeze, oil pressure protection, overload protection. Compressor three-minute delay protection, under-reverse protection and other multiple safety protections. The operation is safe and stable. The fittings are designed scientifically and reasonably through the refrigeration system. Normal operation in different environments overcomes the lack of refrigeration and dehumidification capacity of compressor industry models. The shortcomings of frequent start-up of the unit and high product failure rate also increase the product use time. Evaporator & Condenser Aluminum fin hydrophilic membrane, condenser / evaporator, anti-stain cleaning ability. 0.1mm hydrophilic aluminum foil material, rapid condensation, and greatly improved efficiency. Internally threaded copper pipe greatly improves the efficiency of dehumidification. Highly sensitive temperature measurement control panel uses Schneider components, high sensitivity, stable and reliable. Using CAREL brand greenhouse sensor accurate measurement and control technology, the temperature adjustable range is 16C ° -30C °. Humidity controllable range RH30-95%. Humidity control accuracy ± 3% RH. Temperature accuracy ± 1 ℃. It has the characteristics of more reliable performance and more flexible functions. Equipment parameter table:
see details
Air-cooled constant temperature and humidity machine
Brief introduction to the performance of : The air-cooled constant temperature and constant humidity unit is mainly used to stabilize air temperature and humidity and purified air processing equipment. It integrates cooling, heating, humidification, dehumidification, purification and fresh air functions into one, which can achieve accurate and reliable. Constant temperature and humidity control to meet the user's many different environmental requirements. Product features: Classification description: A. According to environmental control requirements, it can be divided into high precision, ordinary precision, high precision and reliable; B. It can be divided into air-cooled and water-cooled according to the cooling method; C, it can be divided into conventional series according to use, Purification series, high temperature series, low temperature series, low humidity series; D. According to the dehumidification characteristics, it can be divided into refrigeration, runner, and combined constant temperature and humidity unit series; E. According to the physical structure, it can be divided into cabinet type and horizontal type; according to the return air The method can be divided into direct blow type and pipeline type 2. High-quality configuration: A. The heating method is divided into electric heating, hot water heating, and steam heating according to the use conditions, and the heating amount can be selected B, and the humidification method is divided into according to the use conditions : Wet film humidification, dry steam humidification, electrode humidification, etc., and the amount of humidification is optional C, the unit can be customized according to user requirements H407 working fluid such as R407c, R134a unit D, control system using Italian "carel" intelligent shielding can Programming the microcomputer controller, as long as the user sets the required temperature and humidity control range, the unit can automatically run according to the * economical operation mode; the controller uses a serial communication output interface, which can be remotely connected to the network. Control parameters:
see details
Air-cooled thermostat dehumidifier
Brief introduction to the performance of air-cooled thermostat dehumidifier: Air-cooled thermostat dehumidifier uses air-cooled thermostat (with outdoor condenser) to control the temperature rise or fall while dehumidifying. It has the function of air conditioning and integrates dehumidification and refrigeration. There are several types of air supply methods: front air outlet, top air outlet, and duct air supply. Users can choose according to specific conditions. Product features: 1. The optional fully enclosed refrigeration compressor, expansion valve, solenoid valve and other parts of the unit are imported products. 2. The control switch adopts touch buttons, and the operation panel has the function of operation indication and fault display. 3. The fan equipped with the unit adopts high-performance, low-noise centrifugal fan, which has the advantages of low noise, large air volume and high static pressure. 4. The unit can achieve central control, and configure communication interfaces according to user requirements to achieve centralized control and display of long-distance computers. 5. The unit operates smoothly, is easy to operate, has a beautiful appearance, and has a small maintenance workload. Technical parameters:
see details
Combined rotary dehumidifier
Principle of combined rotary dehumidifier: The main structure of the rotary dehumidifier is a continuously rotating honeycomb drying runner, which is composed of a corrugated medium made of a special composite heat-resistant material. The medium contains a hygroscopic agent. The two sides of the dehumidifying rotor made of highly sealed elastic material are divided into two sectors, one is a 270 ° sector for the wet air end, and the other is a 90 ° sector for the regeneration air end. Area. When the humid air to be treated enters the 270 ° sector of the runner, the water molecules in the air are absorbed by the hygroscopic agent in the runner, and the dried air is sent to the dry air outlet through the fan. The wheel rotates at a speed of 8-18 cycles / hour. The fan surface in the processing air area absorbs water molecules and becomes saturated, and then automatically transfers to the fan-shaped area at the regeneration air end to enter the regeneration process. During the regeneration process, after the regeneration air is heated (about 120 ° C), it enters the fan surface of the runner regeneration zone. At high temperatures, water molecules in the runner are desorbed and lost to the regeneration air. Because the regeneration air loses heat during the desorption process, its temperature decreases, and it becomes humid air with a large moisture content, which is discharged to the outside by the regeneration fan. Dehumidification and regeneration occur simultaneously. The air to be treated is continuously dehumidified, and the rotor is continuously regenerated to continuously dehumidify the air. Product features: 1. PLC programmable controller, human-machine interface at a glance; 2. Intelligent control of regenerative heating, automatic adjustment of temperature and humidity; 3. The unit is equipped with a regenerative over-temperature alarm, and the rotor stops rotating; 4. The air inlet is installed There are filters to prevent dust and reduce the number of cleaning and maintenance; 5. The unit adopts aluminum alloy frame, which is strong and beautiful; 6. The Proflute dehumidification wheel imported from Sweden has super dehumidification capacity; 7. The dehumidification wheel has a long service life, which can reach 8- 18 years; 8. RS485 communication interface is reserved for the unit, which can be connected to the computer; 9. The unit can be connected with refrigeration equipment and purification equipment; 10. Easy operation and maintenance, which can be operated and maintained without professionals; Equipment schematic diagram: Equipment parameter table : Applications: This product is widely used in machine rooms (electricity, telecommunications, etc.), workshop warehouses (electronics, footwear, clothing, tobacco, food, leather, paper products, etc.), ships, port machinery, biopharmaceuticals, medical, precision instruments , Bridge, electronic product processing, candy drying, shipbuilding, spraying and other industries.
see details
Air energy heat pump dryer
Working principle of : The heat pump is essentially a heat lifting device. The high temperature heat pump drying unit uses the reverse Carnot principle to absorb heat from the surrounding environment and transfer it to the heated object. (Higher temperature objects), its working principle is the same as that of the refrigerator, and it works according to the reverse Carnot cycle, except that the working temperature range is different. It is upgraded to high-temperature thermal energy by the heat pump device; the refrigerant (fluramine) is converted into high-temperature and high-pressure gas (temperature up to 80-115 ° C) by the compressor, and enters the indoor heat exchanger, using the exhaust heat of the fan to heat up Dry the room air temperature. The material in the drying room is vaporized by evaporation of the water in the material through the work of hot air, and the evaporated water vapor is discharged by the dehumidification system to achieve the purpose of drying the material. When the high-temperature heat pump drying unit works, like ordinary air conditioners and heat pump units, it absorbs the energy in the low-temperature environment medium in the evaporator QA: It consumes a part of the energy itself, that is, the power consumption of the compressor QB: The heat release QC in the condenser, QC = QA + QB, so the efficiency of the high temperature heat pump drying unit is (QB + QC) / QB, and the heating efficiency of other heating equipment is less than 1, so the high temperature heat pump drying unit is heating The efficiency is far greater than the efficiency of other heating equipment. It can be seen that using a high-temperature heat pump drying unit as a drying device can save energy, and at the same time reduce the emissions of CO2 and other pollutants, achieving the effect of energy saving and emission reduction. Jibei Air Energy Dryer Parameter Table: Note: The above parameters are based on dry bulb temperature of 25 ℃ and wet bulb temperature of 20 ℃. Control system features: 1. Stable performance, easy operation, multi-function control can be achieved, and different types of materials drying process requirements can be met. 2. PLC programmable control method can be used to set different drying curves, such as temperature and humidity settings. 3. The heat pump in the heat pump drying device not only has the drying function, but also has the cooling and heating functions, and realizes various functions such as low temperature processing and greenhouse heating. 4, with power-off memory function, one-button setting, intelligent management. Features of heat pump dryer: 1. Convenient installation: easy installation and removal, small footprint, can be installed indoors or outdoors; 2. ** energy saving: only need to consume a small amount of electrical energy, it can absorb a large amount of heat in the air , The power consumption is only 1/4 of the electric heater; compared with coal, oil, and gas dryers, it can save about 60% of operating costs. 1 kWh is equal to 4 kWh. 3. Environmental protection and no pollution: without any burning matter and emissions, it is a sustainable and environmentally friendly product. 4. Safe and reliable operation: The entire system operates without the dangers of flammable, explosive, poisoning and short circuit that may exist in traditional dryers (fuel, gas or electric heating). It is a safe and reliable semi-closed drying system. . 5. Long service life and low maintenance cost: It is developed on the basis of traditional air-conditioning technology with stable, reliable performance and long service life; safe and reliable operation, fully automatic and manual operation, and intelligent control. 6, comfortable and convenient, high degree of automation and intelligence: self-controlled constant temperature device, continuous drying operation for 24 hours. 7, a wide range of applications, not affected by climate: can be widely used in food, agricultural and sideline products, seafood, paper and wood, leather chemical medicine and other high-temperature hot water and drying system equipment. Application fields of heat pump dryers: medicinal material dryers: Sanqi dryers, octagonal dryers, Morinda dryers, Dendrobium dryers, Yam Huaishan dryers, Ganoderma dryers, sea cucumber dryers, Honeysuckle dryer, Luo Han Guo dryer, cinnamon dryer, ginseng dryer, sand ginger dryer, maca dryer, wolfberry dryer, angelica dryer and so on. Agricultural Product Dryer: Overlord Flower Dryer, Rose Dryer, Chrysanthemum Dryer, Shiitake Dryer, Bamboo Dryer, Sweet Potato Dryer, Okra Dryer, Tobacco Dryer, Tremella Dryer Machine, fungus dryer, pepper dryer, daylily dryer, tea tree mushroom dryer, taro dryer, vegetable dryer, bamboo shoot dryer, cassava dryer, starch dryer , Edible fungus heat pump dryer, vegetable dryer and so on. Fruit dryer: longan dryer, lychee dryer, banana slice dryer, mango dryer, jujube dryer, jujube dryer, bayberry dryer, lemon dryer, grape dryer Machine, jackfruit dryer, kiwi dryer, persimmon dryer, olive dryer, preserved fruit dryer, etc. Food dryer: sausage dryer, bacon dryer, bacon dryer, sausage dryer, casing dryer, river noodle dryer, rice noodle dryer, sweet potato noodle dryer, noodle oven Dryer, noodle dryer, yuba dryer, etc. Seafood dryer: sea fish dryer, squid dryer, shrimp dryer, dried squid dryer, sea cucumber dryer, cuttlefish dryer, seahorse dryer, Yaozhu dryer, etc. . Tea dryer: Pu'er tea dryer, black tea dryer, Dahongpao dryer, Jin Junmei dryer, Tieguanyin dryer, green tea dryer, hair tip dryer, etc. Buddha incense dryer: Buddha incense dryer, plate incense dryer, incense dryer, bamboo stick incense dryer, stick incense dryer, craft incense dryer, mosquito incense dryer and so on. Wood dryers: rosewood dryer, rosewood furniture dryer, rosewood dryer, rosewood dryer, black rosewood dryer, red rosewood dryer, ebony dryer, stripe Ebony Dryer, Chicken Wing Dryer, Redwood Upper Product Dryer, Redwood Furniture Paint Drying Room, Wood Floor Dryer, Wood Product Dryer, Bamboo Product Dryer, Bamboo Tumble Dryer, Bamboo Rubber board dryer, bamboo floor dryer, veneer dryer, eucalyptus rotary cutting board dryer, building template dryer and so on. Industrial product dryer: printing dryer, leather dryer, cloth dryer, gypsum dryer, plastic dryer, electroplating dryer, craft dryer, firework dryer, paper tube dryer Machine, rubber dryer, etc. Production line dryer (tunnel dryer, belt line dryer): rubber glove dryer, noodle tunnel dryer, straight rice flour dryer, gypsum block tunnel dryer, leather tunnel dryer Dryer and much more. Installation diagram: installation example:
see details
Air-cooled freeze dryer
Normal Temperature Air-cooled Freeze Dryer Working principle: The amount of water vapor in the compressed air is determined by the temperature of the compressed air, and the pressure of the compressed air is reduced while the pressure of the compressed air is basically unchanged. Temperature reduces the amount of water vapor in the compressed air, and excess water vapor condenses into a liquid. The refrigerating dryer is based on the correspondence between the saturated steam pressure and temperature of the water, and uses a refrigeration device to cool the compressed air to a certain dew point temperature, precipitating the contained water, and discharging the water through a steam-water separator and an electric drain. , So that the compressed air is dried. Features of air-cooled refrigerating dryer: 1. Ensure the normal operation of the equipment at an ambient temperature of 40 degrees Celsius 2. Use natural air as a cooling medium for the refrigeration system, without the need for a complete set of facilities for water supply, water recovery and cooling, convenient and economical ; 3. The heat exchanger adopts countercurrent design, high heat exchange efficiency and small volume; 4.The steam-water separator adopts three-stage separation method: direct collision separation + low-speed centrifugal separation + stainless steel wire mesh demister, and 99.9 & The liquid water is separated from the cooled compressed air to prevent the secondary evaporation of the water and ensure the low dew point quality of the finished gas; 5. The refrigeration compressor adopts French PERFORMER and German BITZER ), Copeland, MANEUROP, Taiwan CHYNTEC and other companies fully or semi-hermetic refrigeration compressors, stable operation, low noise, high COP, reliable performance, power saving, long life ; 6. Refrigeration control components are made of Danfoss, Denmark, EMERSON, SPORLAN, etc .; 7. Special machines PLC control can be used, operating parameters of real-time display, remote control; working conditions and technical specifications normal air-cooled freeze dryer model parameters
see details
Micro-heat regeneration adsorption dryer
works: Micro-heat regeneration adsorption compressed air dryer uses the pores held by the desiccant material itself to adsorb water molecules in the air according to capillary action, and at the same time desorbs and adsorbs residual heat based on pressure relief. Heat up to remove the adsorbed water. The equipment is generally made in the form of a double cylinder. Under the control of a program controller, the two cylinders work alternately. One cylinder absorbs water, and the other desorbs and regenerates. It works continuously and cyclically. Product Features of Micro-heat Regeneration Adsorption Dryer 1. Pressure dew point can reach -40 degrees Celsius; 2. Regeneration gas consumption ≤ 7%; 3. High-quality switching valve, stable and reliable, can ensure the integrity of the work process, and extend the components. Working life; use active alumina with high hygroscopicity, uniform shape and size, high strength, high output dew point, less dust generation, long service life; 4. Unique regenerative pipe design to ensure the heating and cold blowing of regenerative gas plane When the regeneration gas is used, the distribution of the regeneration gas can be evenly distributed, so that the adsorption and heating of the central part of the adsorption tower is even, heat dissipation is fast, and the regeneration is thorough; Reduce energy consumption; 6, programmable microcomputer controller, cycle time, adsorption, regeneration working time, heating time, heating temperature can be adjusted. To achieve the required gas requirements. Operating conditions and technical indicators Model and parameters of micro-heat regeneration adsorption dryer
see details
Combined low dew point dryer
Principle of combined low dew point dryer: The combined low dew point dryer is composed of a cooling dryer and an adsorption (no heat or heat) dryer through reasonable pipeline connection and volume matching. Cooling dryers have extremely strong water removal capacity, low operating energy consumption, and no loss of air volume. Combined with the characteristics that adsorption dryers can reach lower dew points, the advantages of both can be used to the limit. Before the compressed air enters the adsorption dryer, use a cooling dryer to perform pre-treatment, so that a large amount of water (about 80%) is first removed in the refrigerated dryer. After entering the adsorption dryer for deep drying, it can A very low pressure dew point is reached, up to -70 ° C. It uses a freeze dryer as a pre-water removal device for an adsorption dryer. The strong water removal capacity of the refrigerating dryer drastically reduces the inlet water load of the drying tower. After cooling, the water entering the adsorption tower is about 20% of the ordinary dryer. Under other conditions, it is used for absorption. Low dew-point dry air with water vapor can also decrease by the same magnitude. That is, the amount of regeneration gas is about 1/5 of that of ordinary adsorption dryers. Therefore, it has indeed created conditions for reducing the energy consumption of regeneration, especially the energy consumption of regeneration gas. So as to achieve the best economic operating point and high-quality low-dew point product gas. Product features 1. Low dew point: The combined low dew point dryer can reach a very low pressure dew point, which can routinely reach below -40 ° C, and can reach -70 ° C according to different user requirements. 2. Low energy consumption: The regeneration air consumption of the combined low-dew-point dryer only needs 3% to 5%, which greatly saves the compressed air consumption. 3. Compressed air with different dew points can be provided for different air points. 4. All the operation switches and display instruments of the combined low dew point dryer are concentrated on the panel of the box board. The cooling dryer and the adsorption regeneration dryer can be operated independently or at the same time as cold and suction according to customer needs. . 5. The gas-liquid separator combines two separation technologies: cyclone separation and filter element separation. It can fully separate the cooled liquid water and give full play to the efficiency of freeze drying. 6. Refrigeration compressors adopt medium- and high-temperature full-closed and well-known brands such as PERFORMER, BITZER, COPELAND, MANEUROP, and CHYNTEC of Taiwan. Semi-hermetic refrigeration compressor. 7. The heat exchanger and condenser of the refrigerating dryer are made of high quality ** threaded pipes. 8. The adsorption dryer part adopts a scientific and reasonable design of the structure of the adsorption tower, and the design of the compressed air diffuser, separation plate, and airflow section coils ensures that the adsorbent is in full contact with the compressed air to avoid tunnel effects and effectively reduce The impact of high-speed airflow on the adsorbent reduces the wear of the adsorbent, prolongs the life of the adsorbent, and ensures the stability of the air dew point. 9. The adsorption dryer part can adjust the amount of regeneration gas according to the operating load requirements of the equipment and the level of the air dew point to achieve energy saving effects. 10. The adsorption dryer uses high-performance adsorbent, which has a larger active surface area, higher strength and longer service life. 11. Control method: According to different gas requirements of users, a variety of different control methods are adopted. Air-cooled Combined Low Dew Point Dryer Schematic Conditions and Technical Specifications Air-cooled Combined Low Dew Point Dryer Model Parameters
see details
Waste heat regeneration adsorption dryer
dryer The working principle of waste heat regeneration adsorption dryer: The high-temperature compressed air discharged from the air compressor has two properties of heat and high unsaturation. Compressed heat series products effectively use this original compressed air to carry out adsorption on the adsorbent. Heating regeneration, which saves the power consumption of the electric heater required by the micro-heat dryer series, and eliminates the gas consumption at this stage. After the heating regeneration is completed, the original compressed air directly enters the water cooler to cool and enters the adsorption tower to obtain the dried product. At the same time, we take 3% of the finished product gas to cold-blow regeneration of the heated adsorbent, and the cold-blowing ends the double-tower switching. Characteristics of waste heat regeneration adsorption dryer: 1. ** Energy saving; 2.Pressure dew point can reach -20 ℃ ~ -40 ℃; 3.Average regeneration gas consumption ≤1.5%; 4.High quality switching valve, stable and reliable, can guarantee Integrity of the work flow to extend the working life of the components; 5. Use highly hygroscopic activated alumina, uniform shape and size, high strength, low output dew point, less dust generation, and long service life; 6. Unique regeneration The piping design ensures that the regeneration gas can be evenly distributed during the heating and cold blowing of the regeneration gas, so that the adsorbent in the center of the adsorption tower is evenly heated, heat is radiated quickly, and the regeneration is complete; 7, three-stage drainage function; 8, low pressure loss; Conditions and technical indicators Model parameters of waste heat regeneration adsorption dryer
see details
Compressed air precooler
Compressed hot air pre-cooler working principle: JBAY air separation pre-cooler is based on the principle of refrigeration cycle, cooling high-temperature compressed air, and removing condensate, to provide users with dry and low-temperature compressed air, mainly used for Air separation, a process that requires low temperature for compressed air. Product features: The refrigeration system uses imported well-known brand compressors, which have the characteristics of stable refrigeration performance, high energy efficiency ratio, and low operating noise. Automatic control, compact structure, beautiful chassis, no foundation installation. Working conditions and technical indicators Compressed air precooler model parameters
see details
Explosion-proof commercial dehumidifier
Product introduction of : The products have passed ISO9001: 2015 quality management system certification. The products have passed the explosion-proof certificate issued by the country. The products have passed the national compulsory CCC product certification. The explosion-proof air-conditioning dehumidification products comply with the following explosion-proof products currently issued by the country. Standard: GB3836.1-2010 <Explosive Environment Part 1: General Requirements for Equipment> GB3836.2-2010 <Explosive Environment Part 2: Equipment Protected by Flameproof Enclosure "d"> GB3836.4-2010 <Explosive Environment Section 1 Part 4: Equipment protected by intrinsically safe "i"> GB3836.9-2014 <Explosive environment part 9: Equipment protected by potting "m"> Performance characteristics: Reserve R485 communication interface to achieve centralized control of humidity Sensor fault self-diagnosis function Microcomputer automatic defrosting, more reliable and accurate All metal components and electrostatic spray sheet metal chassis International ** Imported compressor hose continuous drainage function The bottom is equipped with universal wheels, free movement and the use of frequency conversion technology can save Electric 10% evaporator & condenser aluminum fin hydrophilic film, condenser / evaporator, anti-stain cleaning ability 0.1mm hydrophilic aluminum foil material, fast condensation, greatly improve internal thread efficiency The copper tube greatly improves the efficiency of dehumidification. It adopts a powerful power compressor. The compressor and main accessories are designed to operate normally in different environments through a scientific and reasonable design of the refrigeration system. It overcomes the lack of cooling capacity and dehumidification capacity of the compressor industry. The unit frequently starts up and has a high failure rate. The shortcomings of the product also increase the use time of the product. The turbine centrifugal fan is equipped with U-shaped air ducts, which reduces noise and noise, and the wind power is greatly enhanced. The dehumidification rate is large. The circulating air volume is high. The sensitive temperature measurement control panel uses Schneider components, with high sensitivity, stability and reliability Explosion-proof power supply adopts a sealed explosion-proof junction box. Stable performance, safety and reliability. Explosion-proof plugs. Tight protective cover, metal shell, pure copper solid core. Product parameter table:
see details
Explosion-proof industrial dehumidifier
Product introduction of : The products have passed ISO9001: 2015 quality management system certification. The products have passed the explosion-proof certificate issued by the country. The products have passed the national compulsory CCC product certification. The explosion-proof air-conditioning dehumidification products comply with the following explosion-proof products currently issued by the country. Standard: GB3836.1-2010 <Explosive Environment Part 1: General Requirements for Equipment> GB3836.2-2010 <Explosive Environment Part 2: Equipment Protected by Flameproof Enclosure "d"> GB3836.4-2010 <Explosive Environment Section 1 Part 4: Equipment protected by intrinsically safe "i"> GB3836.9-2014 <Explosive environment part 9: Equipment protected by potting "m"> Performance characteristics: Reserve R485 communication interface to achieve centralized control of humidity Sensor fault self-diagnosis function Microcomputer automatic defrosting, more reliable and accurate All metal components and electrostatic spray sheet metal chassis International ** Imported compressor hose continuous drainage function The bottom is equipped with universal wheels, free movement and the use of frequency conversion technology can save Electric 10% evaporator & condenser aluminum fin hydrophilic film, condenser / evaporator, anti-stain cleaning ability 0.1mm hydrophilic aluminum foil material, fast condensation, greatly improve internal thread efficiency The copper tube greatly improves the efficiency of dehumidification. It adopts a powerful power compressor. The compressor and main accessories are designed to operate normally in different environments through a scientific and reasonable design of the refrigeration system. It overcomes the lack of cooling capacity and dehumidification capacity of the compressor industry. The unit frequently starts up and has a high failure rate. The shortcomings of the product also increase the use time of the product. The turbine centrifugal fan is equipped with U-shaped air ducts, which reduces noise and noise, and the wind power is greatly enhanced. The dehumidification rate is large. The circulating air volume is high. The sensitive temperature measurement control panel uses Schneider components, with high sensitivity, stability and reliability Explosion-proof power supply adopts a sealed explosion-proof junction box. Stable performance, safety and reliability. Explosion-proof plugs. Tight protective cover, metal shell, pure copper solid core. Product parameter table:
see details
Explosion-proof temperature control dehumidifier
Product introduction: : All products have passed ISO9001: 2015 quality management system certification. All products have passed the explosion-proof certificate issued by the country. All products have passed the national compulsory CCC product certification. Explosion-proof air-conditioning dehumidifier products meet the following explosion-proof products currently published by the country. Executive standard: GB3836.1-2010 <Explosive environment Part 1: General requirements for equipment> GB3836.2-2010 <Explosive environment Part 2: Equipment protected by flameproof enclosure "d"> GB3836.4-2010 <Explosive environment Part 4: Equipment protected by intrinsically safe "i"> GB3836.9-2014 <Explosive environment Part 9: Equipment protected by potting "m"> Performance characteristics: Explosion-proof temperature-controlled dehumidifier is air-cooled Temperature adjustment (with outdoor condenser), which can control the temperature rise or fall while dehumidifying. It has the function of air conditioning. It integrates dehumidification and refrigeration. The air supply methods include front air outlet, top air outlet, and duct air supply. , Users can choose according to specific circumstances. Product features: 1. The optional fully enclosed refrigeration compressor, expansion valve, solenoid valve and other parts of the unit are imported products. 2. The control switch adopts touch buttons, and the operation panel has the function of operation indication and fault display. 3. The fan equipped with the unit adopts high-performance, low-noise centrifugal fan, which has the advantages of low noise, large air volume and high static pressure. 4. The unit can achieve central control, and configure communication interfaces according to user requirements to achieve centralized control and display of long-distance computers. 5, the unit runs smoothly, easy to operate, beautiful appearance, small maintenance workload equipment parameter table
see details
Explosion-proof constant temperature and humidity machine
Product introduction of : Products have passed ISO9001: 2015 quality management system certification. Products have passed the explosion-proof certification issued by the country. Products have passed the national compulsory CCC product certification. Executive standard: GB3836.1-2010 <Explosive environment Part 1: General requirements for equipment> GB3836.2-2010 <Explosive environment Part 2: Equipment protected by flameproof enclosure "d"> GB3836.4-2010 <Explosive environment Part 4: Equipment protected by intrinsically safe "i"> GB3836.9-2014 <Explosive environment Part 9: Equipment protected by potting "m"> Performance characteristics: Explosion-proof constant temperature and humidity unit is mainly used for stability The air temperature and humidity and purified air treatment equipment integrates the functions of refrigeration, heating, humidification, dehumidification, purification and fresh air into one, which can achieve accurate and reliable constant temperature and humidity control, and meet users' various environmental requirements. Product characteristics: 1. Classification description: A. It can be divided into high precision, ordinary precision, high precision and reliable type according to environmental control requirements; B. It can be divided into air-cooled and water-cooled type according to cooling method; C. It can be divided into conventional according to use. Series, purification series, high temperature series, low temperature series, low humidity series; D, according to dehumidification characteristics can be divided into refrigeration, runner, combined constant temperature and humidity unit series; E, according to the structure can be divided into cabinet type, horizontal type; according to delivery The return air method can be divided into direct blowing type and duct type 2. High-quality configuration: A. The heating method is divided into electric heating, hot water heating, and steam heating according to the use conditions, and the heating amount can be selected B, and the humidification method is based on the use conditions Divided into: wet film humidification, dry steam humidification, electrode humidification, etc., and the amount of humidification is optional C, the unit can be customized according to user requirements HFC working medium such as R407c, R134a unit D, the control system uses Italian "carel" intelligent Shielded programmable microcomputer controller, as long as the user sets the required temperature and humidity control range, the unit can automatically run according to the * economical operation mode; the controller uses a serial communication output interface, which can be networked Remote control equipment parameter table
see details
Explosion-proof cabinet air conditioner
Product introduction: All products have passed ISO9001: 2015 quality management system certification. All products have passed the explosion-proof certificate issued by the country. All products have passed the national compulsory CCC product certification. Explosion-proof air-conditioning dehumidification products meet the following explosion-proof products currently published by the country. Executive standard: GB3836.1-2010 <Explosive environment Part 1: General requirements for equipment> GB3836.2-2010 <Explosive environment Part 2: Equipment protected by flameproof enclosure "d"> GB3836.4-2010 <Explosive environment Part 4: Equipment protected by intrinsically safe type "i"> GB3836.9-2014 <Explosive environment Part 9: Equipment protected by potting type "m"> Performance characteristics: Evaporator & condenser aluminum fins are hydrophilic Membrane, condenser / evaporator, anti-stain cleaning ability 0.1mm hydrophilic aluminum foil material, fast condensation, greatly improve the efficiency of internally threaded copper pipe, greatly improve the efficiency of dehumidification. Use a powerful power compressor, compressor and main accessories through the refrigeration system. Scientific and reasonable design normal operation in different environments overcomes the shortcomings of the compressor industry models, such as insufficient cooling capacity, dehumidification capacity, frequent startup of the unit, high product failure rate, and also improves When using temperature sensitive product length control panel used Schneider components, high sensitivity, reliable power mining explosion proof junction box closed stable, safe and reliable explosion-proof plug tight protective cover, a metal shell, solid core copper apparatus datasheets
see details
Explosion-proof wall-mounted air conditioner
Product introduction of : All products have passed ISO9001: 2015 quality management system certification. All products have passed the explosion-proof certification issued by the country. All products have passed the national compulsory CCC product certification. Explosion-proof air-conditioning dehumidification products meet the following explosion-proof products currently issued by the country Executive standard: GB3836.1-2010 <Explosive environment Part 1: General requirements for equipment> GB3836.2-2010 <Explosive environment Part 2: Equipment protected by flameproof enclosure "d"> GB3836.4-2010 <Explosive environment Part 4: Equipment protected by intrinsically safe type "i"> GB3836.9-2014 <Explosive environment Part 9: Equipment protected by potting type "m"> Performance characteristics: Evaporator & condenser aluminum fins are hydrophilic Membrane, condenser / evaporator, anti-stain cleaning ability 0.1mm hydrophilic aluminum foil material, fast condensation, greatly improve the efficiency of internally threaded copper pipe, greatly improve the efficiency of dehumidification. Use a powerful power compressor, compressor and main accessories through the refrigeration system. Scientific and reasonable design normal operation in different environments overcomes the shortcomings of the compressor industry models, such as insufficient cooling capacity, dehumidification capacity, frequent startup of the unit, high product failure rate, and also improves When using temperature sensitive product length control panel used Schneider components, high sensitivity, reliable power mining explosion proof junction box closed stable, safe and reliable explosion-proof plug tight protective cover, a metal shell, solid core copper apparatus datasheets
see details
Explosion-proof ceiling air conditioner
Product introduction: Products have passed ISO9001: 2015 quality management system certification. Products have passed the explosion-proof certificate issued by the country. All products have passed the national compulsory CCC product certification. Explosion-proof air-conditioning dehumidification products comply with the following explosion-proof products currently issued by the country. Standard: GB3836.1-2010 <Explosive Environment Part 1: General Requirements for Equipment> GB3836.2-2010 <Explosive Environment Part 2: Equipment Protected by Flameproof Enclosure "d"> GB3836.4-2010 <Explosive Environment Section 1 Part 4: Equipment protected by intrinsically safe type "i"> GB3836.9-2014 <Explosive environment part 9: Equipment protected by potting type "m"> Performance characteristics: Evaporator & condenser aluminum fin hydrophilic film , Condenser / evaporator, anti-stain cleaning ability 0.1mm hydrophilic aluminum foil material, fast condensation, greatly improve the efficiency of internally threaded copper pipe, greatly improve the efficiency of dehumidification, adopt a powerful power compressor, compressor and main accessories through refrigeration system science Reasonable design and normal operation in different environments overcome the shortcomings of the compressor industry models, such as insufficient cooling capacity, dehumidification capacity, frequent startup of the unit, and high product failure rate. When using temperature sensitive product length control panel used Schneider components, high sensitivity, reliable power mining explosion proof junction box closed stable, safe and reliable explosion-proof plug tight protective cover, a metal shell, solid core copper apparatus datasheets
see details
Our quality is better for the same product, our price is lower for the same quality, and our service is better for the same price!
Search for related products:
    Know what customers want, supply what customers want, and anxious what customers want!
    上海新湖青蓝国际

    Purchase the company's JFZ-10S industrial dehumidifier for dehumidification of 30,000 square meters underground garage.

    龙蟒大地农业有限公司

    Purchase the company's JBZB-5000F combined rotary dehumidifier for cold dehumidification in the tower of compound fertilizer production.

    上海宝龙药业有限公司

    Purchase the company's DH-870C commercial dehumidifier for dehumidification in the pharmaceutical workshop.

    上海中华商务联合印刷有限公司

    Purchase our company's DH-858C commercial dehumidifier for dehumidification in printing workshop.

    Advocating energy saving and environmental protection, ** new industry concept!
    Application of heat pump dryer in drying walnuts

    Overview of walnut drying: Walnuts, which are native to the Near East, are also known as walnuts, citrons, and almonds, cashews, and hazelnuts. They are also called the "four major dried fruits" in the world. It can be eaten raw, fried, or squeezed with oil, prepared pastry, candy, etc., not only delicious, but also has high nutritional value. Its footprint spans almost all parts of the world, mainly in many parts of the Americas, Europe and Asia. In addition to the United States, its output is pushed to China. Walnuts are called "Hercules Food", "nutrient-rich nuts", and "educational fruits" abroad; they enjoy the reputations of "Long live", "Longevity Fruit", and "Treasures of Treasure" in China. Its superior brain-building effect and rich nutritional value have been respected by more and more people. In 1972, the Cishan cultural site was discovered. In the gray pits excavated at the Cishan site, tree seed piles were found at the bottom of the two pits, and hazelnuts, Xiaoyepu and walnuts can be identified. Walnuts are today's walnuts. In the past, walnuts were thought to have been introduced to the mainland when Zhangye of the Han Dynasty passed through the Western Regions. The unearthed walnuts at the Cishan site have confirmed that the area was planted more than 7,000 years ago. The nutritional value of walnuts: 1. Walnuts are rich in unsaturated fatty acids. Frequent consumption of walnuts will not only raise blood sugar, but also reduce the absorption of cholesterol in the intestine. It is suitable for patients with hyperlipidemia, hypertension and coronary heart disease. Walnuts contain A large amount of fat can moisturize the intestines, treat constipation, and make people who lose weight gain weight. 2. As long as the fatty acid in walnut is linoleic acid, it is an essential fatty acid for the human body and an ideal skin cosmetic agent for the human body. 3. Walnuts are rich in vitamin B and vitamin E, which can age cells, have brain health, enhance memory and delay aging. 4. Walnut kernel contains linoleic acid, calcium, phosphorus, and iron. It is an ideal skin cosmetic for the human body. It is often used to moisturize the skin and beard hair, and has the function of preventing premature whitening and hair loss. 5. Walnut kernel also contains a variety of trace elements needed by the human body. It is an important adjunct to proprietary Chinese medicines. When you feel tired, chew some walnut kernels. There is a walnut drying process that is commonly used to reduce fatigue and stress. The walnut drying process is mainly divided into intelligent or semi-only mechanical baking equipment and self-built walnut drying. Craft walnut drying craft walnut baking kiln two categories. The mechanical automatic baking equipment adopts the smokeless baking design; the self-built baking kiln is divided into two types: smoked baking kiln and smokeless baking kiln. No matter what kind of equipment is used for baking, the changes in the baking temperature are: low → high → low. The temperature and time of each stage are roughly as follows: Low temperature ———————— -------------------— High temperature ——————————— —----— Low temperature holding temperature: 35-40 ° C; 40-50 ° C; 30-35 ° C; Baking time: 0-5 hours 5-30 hours 35-50 hours Introduce several kinds of baking walnut baking Dry process walnut drying process: 1. The baking method of the smoke-free self-built baking kiln adopts the heating method of roasting dragon to heat, and each time, about 1.5 tons of fresh stone fruits can be baked. First, check if the grilled dragon has leaked air or smoke. If you find that the leaked air or smoke is leaking, you must deal with it before baking. The peeled walnuts should be promptly put into a kiln (furnace) and stacked on the grill (the pile of stone fruit should not exceed 50 centimeters in thickness), and immediately start a fire. 0 to 5 hours after entering the furnace, the furnace temperature is controlled at 35 ° C to 40 ° C; the furnace temperature is controlled at 40 ° C to 45 ° C at the 5th to 15th hour; the furnace temperature is controlled to 40 ° C to 50 ° C at the 15th to 30th hour; -50 hours furnace temperature is controlled at 30 ℃ —35 ℃, until the walnut is dry and comes out. When baking, if the oven temperature is too high, the fire should be controlled in time to reduce the temperature of the oven; 5 to 15 hours after entering the oven, all the dehumidification equipment should be turned on and the moisture should be drained as soon as possible; walnut drying process walnut drying process walnut drying process to avoid The fire is too intense in the early stage, and the stone fruit should be heated gradually and simultaneously at the same time, so that the internal drainage of walnut kernels will be uniform and thorough, preventing walnut kernels from yellowing. Walnut drying process In the early stages of the walnut baking process, in order to ensure a balanced discharge of water from walnut kernels, it should not be turned. 2. Baking method of household walnut oven “New household walnut smoke-free baking room” is a new type of walnut drying equipment with intelligent temperature control and smoke-free pollution. Walnut drying technology. Walnut baking equipment. The amount is about 300kg. For the convenience of farmers, the baking temperature is set to about 45 ° C. During the entire baking process, you only need to manually add fuel such as firewood and coal, automatically control the temperature, and dehumidify in time. About 10 minutes before baking, fire and start to preheat the baking room. After that, the freshly peeled nuclei are evenly loaded on each layer of iron sieve in the baking room and continuously heated. Close the oven door, open the cold air window and the moisture exhaust window during the baking process. The baking time is about 36 hours. Walnut dryer drying process: The first stage-timely entering the warehouse to dehumidify (30-35 ℃ → 12-15 hours) 8 hours after peeling the green skin, put it in the warehouse and dehumidify and bake, the dehumidification temperature is 30-35 ℃ , The baking time is 12-15 hours, water is lost on the surface of the husk, and the moisture is removed when the color changes from dark brown to brown. The second stage-fixed color initial roasting (50 ℃ → 12 hours) After the dehumidification is completed, the fixed color initial roasting is started, the temperature is raised to 50 ℃, the baking time is 12 hours, and the drying is completed. Ren has fixed his color, and is 70% dry, but he can still take off his clothes. The third stage-Wenhuo dried kernels (30 ℃ → 16 hours) After the fixed color drying period ends, the dried kernels enter into the dried kernel phase. The temperature is controlled at 30 ℃ for about 16 hours. At this time, the water content of stone fruits reaches about 10%. After the dried kernel phase, the fire can be discarded, and the stone fruit on the oven can be satisfactorily covered with a sackcloth bag, and kept warm for several hours, so that the moisture in the upper stone fruit will continue to volatilize, and the upper and lower stone fruit will dry relatively evenly.

    Application of air energy dryer in baking longan

    Overview of longan drying: Longan is a characteristic fruit in the south of China. It is often listed in large quantities in summer and autumn. The cause and effect are round and shiny, and the umbilicus is white. It seems to be named after the legendary "dragon" eyes. Longan's other name is Longan. Fresh longan meat is smooth and tender, juicy and sweet, and tastes **, but it is not easy to keep fresh. People often roast fresh longan fruit into dried fruits, called longan meat, longan balls, longan dried broccoli, long pineapple, dried longan, brocade Suilongangan and so on, which is commonly used in traditional Chinese medicine. Longan is the top grade in Xiamen Dongjin Fruit Forest Farm. Longan drying machine drying process: the first baking requires high temperature baking, the temperature is controlled at 65 degrees, the baking time is 6 to 8 hours, the intermediate temperature is controlled at 60 ℃, the entire baking time is about 30 hours, Until the husks harden in the baking room. After baking again, after the longan dried for the first time, the internal moisture of the fruit kernels and pulp gradually diffuses outward, and the surface of the pulp is wetter than immediately after baking, and must be baked again. At this time, the dried longan can be divided into 2 grades, large and small, and baked separately. The re-baking method is the same as the initial baking, the temperature is controlled at about 60 ° C, and the baking time is about 4-6 hours. Generally, the longan can be baked again until the fruit stalks are gently pushed with fingers to fall off. At this time, the flesh appears fine wrinkles, dark brown, and the surface is dry. There is no juice flowing out with the pressure of the fingers. The core of the bite is easy to crack, and the cross-section is plant-gray. Cut the pedicle. After the first and second fruits have been roasted for three times, the stems are cut flat with scissors. Drying standards and quality requirements. Drying standard: The fruit shell can be flattened by light pressure, the flesh is dry and russet, shiny and wrinkled, the core of the fruit is easy to crack with teeth, and the section is gray. Quality requirements: longan of the same grade should be dry and uniform, the fruit pedestal should be complete, the appearance should be smooth, the flesh should have no burnt smell, no mildew, no moth, and the shell breaking rate should not exceed 5%.

    Application of air energy dryer in baking bergamot

    Overview of bergamot drying: The bergamot has a long history of cultivation in China. It is mainly produced in Zhaoqing, Gaoyao, Deqing, Yunfu, Sihui, Yunan and other places in Guangdong. Produced in Sichuan, called "Sichuan Buddha". Produced in Zhejiang, called "Golden Buddha Hand". In addition, Guangxi, Anhui, Yunnan, Fujian and other provinces have also been cultivated and produced. The bergamot is based on Guangdong products, with good quality and quality. The processed product "Phnom Penh White Meat" enjoys a high reputation in domestic and foreign markets. It is one of the "Top Ten Guangdong Medicines" of Guangdong's authentic herbs. Bergamot drying process: In the first stage, the temperature is set to 63 degrees in 2 hours, which plays a role in killing blue and fixing color, and does not drain moisture. The second stage is 5 hours, the temperature is set to 55 degrees, the process of the host starting drying + dehumidification, dehumidification must also ensure that the temperature is constant, otherwise it will affect the quality and efficiency of bergamot drying. The third stage is 1-2 hours, the temperature is set at 65 degrees, and the humidity is low at this time, and it can be set to regular dehumidification. Service commitment: The warranty period is one year after the equipment is shipped to the buyer. During the warranty period, no matter what kind of parts are damaged, we will provide them for free and provide free services. Lifetime tracking service. For the equipment with more than one year warranty period, only the cost of parts will be charged for the replacement of damaged parts, and free services will be implemented. Tailor-made + long-term tracking service + on-site installation and commissioning + one-year quality package + lifetime maintenance If you want to know more about the sausage dryer in detail, you can contact us as soon as possible. We will pass the information of dryer ** to you and we will give you a satisfactory answer. Can evaluate design schemes and benefit analysis for customers free of charge, can be used for energy management cooperation, welcome to consult, visit customer cases, Shanghai Jibei Air Treatment Equipment Co., Ltd. We are here to help you, please dial the number below! Jibei will work with you to create a better tomorrow! Mutual benefit and win-win situation!

    Application of air energy dryer in drying lily

    Basic introduction of lily: Lily is a perennial herb bulbous plant, mainly distributed in the temperate regions of eastern Asia, Europe, North America, and other northern hemispheres. There are more than a hundred species found worldwide. China is its main origin and is a natural species of lily Distribution center. There are about 100 species of lily plants in the world, of which 55 species are native to China. In recent years, many new varieties have been produced through artificial hybridization, such as Asian lily, musk lily, perfume lily and so on. The main application value of lily is ornamental, and some varieties can be eaten as vegetables; China's Lanzhou lily, which is famous for its edible value, has been recorded in Pingliang County, Gansu Province for more than 450 years. At present, edible lilies are widely planted in Qilihe and other areas in Lanzhou, and enjoy a high reputation at home and abroad. Lanzhou lily is large and sweet. It can be used as a snack or as a dish. Lily soup made from the lily of the valley in Yixing is the best summer heat. Lily can also be made into dried lily and lily powder, which are very expensive in the international market. So far, lily is still a commonly used medicinal material in Chinese medicine. Traditional Chinese medicine believes that Lily has a slightly cold level, which has the effects of clearing fire, moisturizing the lungs, and soothe the nerves. Its flowers and bulbous stems can be used as medicine. Selection of lily raw materials: Choose white, large, tightly packed lily bulbs, remove "thousand-word heads" (that is, small and many bulbs, small scales and not tight), worms, yellow spots, mildew, and redness of the epidermis Lily; use a sharp knife to remove hair roots to remove soil impurities and skin aging petals; divide the peeled petals into three levels of large, medium and small (the ratio of large to small is 4: 5: 1), and then select and arrange the fresh lily Large, medium and small orders are rinsed 2-3 times with water. Lily drying sequence: fresh lily bulbs → material selection → cleaning → peeling and color protection → hot soup to eliminate enzymes → cold water rinsing → drain the surface moisture → load into a special lily pallet truck (divided into about 6-10 layers) to advance drying Room → hot air circulation drying → selection and classification → packaging → sealing → storage → finished products. Lily drying process: 1. Selection of materials for cleaning. Selection of one hundred raw materials weighing more than 150 grams, individual hypertrophy, fresh, no discoloration, no moth, no damage, high quality. Wash the sand and impurities on the surface of the bulb with water. 2. Peel color protection. First remove the old scales and stem chassis surrounding the lily, then peel the scales and classify them according to different sizes, and then put the color protection solution in time to prevent the scales from browning under the sun. 3. Scalding enzymes. The hot-scalding enzyme is generally carried out in a tiltable stainless steel open pot, and the amount of water added is 4 times that of the scales. The amount of lily scales should not be excessive, otherwise the heat will be uneven. First turn on the large steam to boil the water in the pot, then put the scales in and mix well. When you find that the water in the pot is boiling for the second time, you should immediately remove the scales. The operation of scalding enzymes must be well grasped. If the temperature and time of scalding are not reached, the scales will oxidize and brown during drying. If the scalding is overheated, the scales will burn out. After drying, the scales will easily break or form fish scales. The color is deepened. 4. Rinse in cold water. Immediately put the hot scales into running cold water to rinse them, and then remove the drained surface water. 5. Hot air drying. Pour the drained scales into a baking dish, spread them evenly, install them in a drying car, and push them into the drying equipment for hot air circulation drying. The temperature is controlled at 60-70 ° C, and it is turned over once an hour, dried to a scale with a moisture content of about 10%, and the scales are brittle by hand. 6. wrap up and store. Immediately after classification, the package was sealed and placed in a cool and ventilated warehouse to prevent worms and mildew.

    Application of heat pump dryer in drying pepper

    Overview of pepper drying: pepper harvest season. It is the rainy season. Under normal circumstances, the frequency of autumn rain is more than 70% to 80%. If it cannot be dried in time, the phenomenon of mildew is very serious. There are two traditional methods of drying, one is to bind manually one by one. Then it is hung on the coal fire for a long time. The other method is the above two conventional drying methods. The pepper has poor quality, yellow flowers and white shells, large pollution, high labor intensity, and small processing capacity. In recent years, drying technology has been gradually promoted in China, and technologies and machinery such as earthenware, far infrared, and dryers have developed rapidly. However, to achieve the purpose of good drying quality and low cost, the drying process must be carefully studied. Stacking thickness: The stacking thickness of peppers should be one to one, generally 20-30 cm is appropriate. The stacking is too thin, the air permeability is good, and the wind resistance is small, although it is good for heat exchange. However, the contact time between hot air and pepper is relatively short, and the heat utilization rate is low. If stacked too thick. The resistance increases too, and hot air cannot penetrate the layer. Selection of temperature with poor drying effect: How the hot air temperature value of pepper drying relates to spicy quality and drying efficiency, try to analyze the ingredients of pepper and the influence of several main ingredients at a certain temperature . 500 grams of various types of nutritional ingredients in pepper products: protein 4.5 grams iron 2.2 mg fat 0.6 g carotene 2.04 mg sugar 12.1 g thiamine 0.11 mg calories 75 kcal Acid 0.8 mg calcium 34 mg riboflavin 0.08 mg phosphorus 112 mg ascorbic acid 518 mg pepper contains ten main nutrients. Among them, some ingredients are easy to be lost and destroyed under high temperature. In order not to reduce the nutritional ingredients, it is not suitable to choose a higher hot air temperature. The moisture content of pepper raw materials is very high, usually 75% to 85%. Dry with hot air at 40-60 ° C. At first, the relative temperature of the exhaust gas is lower than 70%. After 5 hours, the relative humidity of the exhaust gas drops below 52%. After 12 hours, the relative humidity of the exhaust gas is lower than 40%. It can be seen that the precipitation rate of peppers is under the control of internal water transfer most of the time. Therefore, the productivity of pepper drying operations is mainly determined by the temperature of the peppers, not the hot air humidity and dehumidification capacity. The nutritional content of the peppers will not be affected and the productivity will be comprehensively considered. The hot air temperature of roasted peppers should be 60-70 ° C. Selection of drying medium: pepper is food. The pollution requirements are strict. If anthracite and coke are used as fuel, the direct heating method will cause serious pollution. So choosing safer and pollution-free equipment is also critical for pepper drying. Drying process of pepper dryer: Segmented drying is the superior method for drying peppers at present, that is, peppers with a moisture content of 75% to 85%, first dry to a moisture content of 50%. Secondary drying. Stepping on the pile and sweating: It is an important step in the drying process of peppers. Whether to use this step has a great impact on the quality of peppers, the drying time and the amount of drying. There are obvious softening and swelling phenomena during the drying process. The main role of sweating on the pile is to quench and temper, to make the pepper oil penetrate to the surface, and the dried peppers have the same color, ruddy and smooth, and promote the moisture content of the pepper to balance. If you do not sweat on the pile, drying 1,000 kilograms of pepper, it takes 63 hours to heat the hot air at 40-60 ° C. After you step on the pile, you can shorten it to about 40 hours, and the yellow shell of the flower is significantly reduced. When the peppers are sweating on the pile and enter the second drying, it should not be turned too much, otherwise the damage rate of the peppers will be increased and the sales price will be reduced. Due to the different quality and maturity of peppers, some peppers that cannot be dried in the first drying operation should be selected and re-dried. Machine selection: Jibei high-temperature heat pump drying and dehumidifying integrated machine is particularly suitable for pepper drying. Jinkai dryer can achieve ** temperature control, easy operation, and no pollution to the environment and materials. It uses air heat compared to other Equipment is more energy efficient. Performance characteristics of Jibei heat pump dryer: 1) Convenient installation: convenient installation and demolition, small footprint, can be installed indoors and outdoors; 2), ** energy saving: only need to consume a small amount of electricity, it can be used in the air It absorbs a large amount of heat and consumes only one-third to one-fourth of the heater; compared with coal, oil and gas drying equipment, it can save about 75% of operating costs. 1 kWh is equal to 4 kWh. 3), environmental protection and no pollution: no burning matter and emissions, fully comply with food hygiene standards, is a sustainable development of environmentally friendly products. 4) Safe and reliable operation: The entire system operates without the dangers of flammable, explosive, poisoning and short circuit that may exist in traditional dryers (fuel, gas or electric heating). It is a safe and reliable fully enclosed dry system. 5) Long service life and low maintenance cost: It is developed on the basis of traditional air-conditioning technology. The process technology is mature, the performance is stable and reliable, and the service life is long. The operation is safe and reliable, fully automatic without manual operation, and intelligent control. . 6), comfortable and convenient, high degree of automation and intelligence: automatic temperature control device, continuous drying operation for 24 hours. 7) Wide range of application, not affected by climate: it can be widely used in heating and drying operations in food, chemical, pharmaceutical, paper, leather, wood, agricultural and sideline products processing industries

    • Application of industrial dehumidifier in various industries
      Application of industrial dehumidifier in various industries
      2016-07-14

      At present, industrial dehumidifier supplies are also developing extremely rapidly. In many industrial production and life, we are widely used. Here we give you a few common examples to understand the widespread use of industrial dehumidifiers. Below we Let's find out together. 1. Application in safety glass production: The transparent thin plastic sheet in the safety glass interlayer has strong hygroscopicity. Moisture-absorbing films will emit water vapor bubbles during the process. Hermetically controlled relative humidity is very important in this process. The standard design condition for this application is 40% relative humidity at a comfortable temperature. 2. Application of air transportation: The operators of the storage and transportation system are impressed by the impact of high humidity *. Obvious results are caused by blocked pipes, poor product quality and increased maintenance times. Compressed air increases the possibility of moisture condensation in the air. When the ingredients in the product absorb moisture, they become sticky and accumulate in the conveyor line, causing the aforementioned results. 3. Plastic resin drying: All plastic resins have some degree of hygroscopicity. When the plastic raw material particles are extruded, the moisture is heated and evaporated. These vapors can cause fine seams between the plastic structure and the exterior. Industrial dehumidifier can reduce the humidity in plastic raw materials, improve the quality of finished products, reduce waste and increase manufacturing speed. 4. Use of candy packaging: Candy usually contains maltose and glucose, both of which are hygroscopic substances. When the relative humidity is high, the product will absorb moisture and become sticky. It is easy to stick to high-speed packaging machines and packaging materials and interrupt production lines. The use of industrial dehumidifiers can effectively control the temperature and humidity of the packaging area (relative humidity 35%) and effectively improve economic efficiency.

    • Temperature adjustment of industrial dehumidifier
      Temperature adjustment of industrial dehumidifier
      2016-07-14

      With the continuous development of dehumidifiers, they have become more and more popular, and the scope of use has also begun to expand. Everyone needs to have a certain understanding of their own characteristics when using dehumidifiers, so that they can be better used. . Today Xiaobian is here to bring you the knowledge about humidity adjustment of industrial dehumidifiers. Interested friends can come to understand together. While the industrial dehumidifier controls humidity, it can adjust the temperature according to the needs of the site. The temperature condition types include heating type, temperature adjustment type, and cooling type. 1. The heating dehumidifier is mainly used for dehumidification and has no cooling function, so it is suitable for dehumidification places without temperature requirements. 2. The thermostat dehumidifier combines dehumidification and cooling functions, and the cooling capacity is adjustable, so it is especially suitable for dehumidification places with large changes in heat load. 3. The cooling dehumidifier has a cooling function at the same time as the dehumidification, but the cooling capacity is not adjustable, so it is suitable for dehumidification occasions with large heat load and low relative humidity requirements.

    • Is the dehumidifier industry feasible in e-commerce development?
      Is the dehumidifier industry feasible in e-commerce development?
      2016-07-14

      With the development of society and economy, e-commerce platforms can more and more approach people's lives, but whether the type of industry such as dehumidifier is suitable for the development of e-commerce, we need to explore. The vigorous development of e-commerce has made us pay more and more attention to e-commerce platforms, and we want to become the main e-commerce supplier of dehumidifiers and other products. However, is a bulky product like our dehumidifier suitable for development on e-commerce platforms such as Alibaba? One of our products, small dehumidifiers such as household dehumidifiers and industrial dehumidifiers, is said to weigh at least 15 kilograms. Is the logistics strong enough to develop national and even global business? With the low-margin sales of e-commerce and high-margin logistics costs, as regional agents, are there any profits?

    • Application of industrial dehumidifier in warehouse
      Application of industrial dehumidifier in warehouse
      2016-07-14

      Industrial dehumidifier for warehouse is recommended. According to the weather forecast report, in recent days, most cities in the south have been affected by unexpected heavy rainfall. Many industrial manufacturers have been caught by surprise. The warehouse has not yet taken effective measures to prevent moisture and dehumidification, and humid air has invaded the manufacturers. Our warehouse, this situation makes the goods in the warehouse face moisture problems. Hangzhou Huanke Electric Co., Ltd. recommends a suitable industrial dehumidifier for industrial warehouse, Huanke DH-5168C industrial dehumidifier. With this equipment, it can ensure that the warehouse within 200 square meters is not affected by humid air, and can keep the indoor environment dry. Comfortable. It can be seen that the use of the dehumidifier in the warehouse is of great significance, but how does the dehumidifier work? Let ’s take a look at the working principle of the dehumidifier: The working principle of the dehumidifier: The dehumidifier is composed of a compressor, a heat exchanger, a fan, a casing and a controller. Its working principle is: a fan The humid air is drawn into the machine and condensed into frost under the interaction of the refrigeration system (compressor, evaporator, condenser). The system automatically warms up the defrost into water and flows into the water tank, which produces dry air to be discharged. This cycle makes the indoor humidity Lower, the humid space gradually achieves the dry effect.

    • Application of heat pump dryer in drying walnuts
      Application of heat pump dryer in drying walnuts
      2017-12-03

      Overview of walnut drying: Walnuts, which are native to the Near East, are also known as walnuts, citrons, and almonds, cashews, and hazelnuts. They are also called the "four major dried fruits" in the world. It can be eaten raw, fried, or squeezed with oil, prepared pastry, candy, etc., not only delicious, but also has high nutritional value. Its footprint spans almost all parts of the world, mainly in many parts of the Americas, Europe and Asia. In addition to the United States, its output is pushed to China. Walnuts are called "Hercules Food", "nutrient-rich nuts", and "educational fruits" abroad; they enjoy the reputations of "Long live", "Longevity Fruit", and "Treasures of Treasure" in China. Its superior brain-building effect and rich nutritional value have been respected by more and more people. In 1972, the Cishan cultural site was discovered. In the gray pits excavated at the Cishan site, tree seed piles were found at the bottom of the two pits, and hazelnuts, Xiaoyepu and walnuts can be identified. Walnuts are today's walnuts. In the past, walnuts were thought to have been introduced to the mainland when Zhangye of the Han Dynasty passed through the Western Regions. The unearthed walnuts at the Cishan site have confirmed that the area was planted more than 7,000 years ago. The nutritional value of walnuts: 1. Walnuts are rich in unsaturated fatty acids. Frequent consumption of walnuts will not only raise blood sugar, but also reduce the absorption of cholesterol in the intestine. It is suitable for patients with hyperlipidemia, hypertension and coronary heart disease. Walnuts contain A large amount of fat can moisturize the intestines, treat constipation, and make people who lose weight gain weight. 2. As long as the fatty acid in walnut is linoleic acid, it is an essential fatty acid for the human body and an ideal skin cosmetic agent for the human body. 3. Walnuts are rich in vitamin B and vitamin E, which can age cells, have brain health, enhance memory and delay aging. 4. Walnut kernel contains linoleic acid, calcium, phosphorus, and iron. It is an ideal skin cosmetic for the human body. It is often used to moisturize the skin and beard hair, and has the function of preventing premature whitening and hair loss. 5. Walnut kernel also contains a variety of trace elements needed by the human body. It is an important adjunct to proprietary Chinese medicines. When you feel tired, chew some walnut kernels. There is a walnut drying process that is commonly used to reduce fatigue and stress. The walnut drying process is mainly divided into intelligent or semi-only mechanical baking equipment and self-built walnut drying. Craft walnut drying craft walnut baking kiln two categories. The mechanical automatic baking equipment adopts the smokeless baking design; the self-built baking kiln is divided into two types: smoked baking kiln and smokeless baking kiln. No matter what kind of equipment is used for baking, the changes in the baking temperature are: low → high → low. The temperature and time of each stage are roughly as follows: Low temperature ———————— -------------------— High temperature ——————————— —----— Low temperature holding temperature: 35-40 ° C; 40-50 ° C; 30-35 ° C; Baking time: 0-5 hours 5-30 hours 35-50 hours Introduce several kinds of baking walnut baking Dry process walnut drying process: 1. The baking method of the smoke-free self-built baking kiln adopts the heating method of roasting dragon to heat, and each time, about 1.5 tons of fresh stone fruits can be baked. First, check if the grilled dragon has leaked air or smoke. If you find that the leaked air or smoke is leaking, you must deal with it before baking. The peeled walnuts should be promptly put into a kiln (furnace) and stacked on the grill (the pile of stone fruit should not exceed 50 centimeters in thickness), and immediately start a fire. 0 to 5 hours after entering the furnace, the furnace temperature is controlled at 35 ° C to 40 ° C; the furnace temperature is controlled at 40 ° C to 45 ° C at the 5th to 15th hour; the furnace temperature is controlled to 40 ° C to 50 ° C at the 15th to 30th hour; -50 hours furnace temperature is controlled at 30 ℃ —35 ℃, until the walnut is dry and comes out. When baking, if the oven temperature is too high, the fire should be controlled in time to reduce the temperature of the oven; 5 to 15 hours after entering the oven, all the dehumidification equipment should be turned on and the moisture should be drained as soon as possible; walnut drying process walnut drying process walnut drying process to avoid The fire is too intense in the early stage, and the stone fruit should be heated gradually and simultaneously at the same time, so that the internal drainage of walnut kernels will be uniform and thorough, preventing walnut kernels from yellowing. Walnut drying process In the early stages of the walnut baking process, in order to ensure a balanced discharge of water from walnut kernels, it should not be turned. 2. Baking method of household walnut oven “New household walnut smoke-free baking room” is a new type of walnut drying equipment with intelligent temperature control and smoke-free pollution. Walnut drying technology. Walnut baking equipment. The amount is about 300kg. For the convenience of farmers, the baking temperature is set to about 45 ° C. During the entire baking process, you only need to manually add fuel such as firewood and coal, automatically control the temperature, and dehumidify in time. About 10 minutes before baking, fire and start to preheat the baking room. After that, the freshly peeled nuclei are evenly loaded on each layer of iron sieve in the baking room and continuously heated. Close the oven door, open the cold air window and the moisture exhaust window during the baking process. The baking time is about 36 hours. Walnut dryer drying process: The first stage-timely entering the warehouse to dehumidify (30-35 ℃ → 12-15 hours) 8 hours after peeling the green skin, put it in the warehouse and dehumidify and bake, the dehumidification temperature is 30-35 ℃ , The baking time is 12-15 hours, water is lost on the surface of the husk, and the moisture is removed when the color changes from dark brown to brown. The second stage-fixed color initial roasting (50 ℃ → 12 hours) After the dehumidification is completed, the fixed color initial roasting is started, the temperature is raised to 50 ℃, the baking time is 12 hours, and the drying is completed. Ren has fixed his color, and is 70% dry, but he can still take off his clothes. The third stage-Wenhuo dried kernels (30 ℃ → 16 hours) After the fixed color drying period ends, the dried kernels enter into the dried kernel phase. The temperature is controlled at 30 ℃ for about 16 hours. At this time, the water content of stone fruits reaches about 10%. After the dried kernel phase, the fire can be discarded, and the stone fruit on the oven can be satisfactorily covered with a sackcloth bag, and kept warm for several hours, so that the moisture in the upper stone fruit will continue to volatilize, and the upper and lower stone fruit will dry relatively evenly.

    • Application of air energy dryer in baking longan
      Application of air energy dryer in baking longan
      2017-12-03

      Overview of longan drying: Longan is a characteristic fruit in the south of China. It is often listed in large quantities in summer and autumn. The cause and effect are round and shiny, and the umbilicus is white. It seems to be named after the legendary "dragon" eyes. Longan's other name is Longan. Fresh longan meat is smooth and tender, juicy and sweet, and tastes **, but it is not easy to keep fresh. People often roast fresh longan fruit into dried fruits, called longan meat, longan balls, longan dried broccoli, long pineapple, dried longan, brocade Suilongangan and so on, which is commonly used in traditional Chinese medicine. Longan is the top grade in Xiamen Dongjin Fruit Forest Farm. Longan drying machine drying process: the first baking requires high temperature baking, the temperature is controlled at 65 degrees, the baking time is 6 to 8 hours, the intermediate temperature is controlled at 60 ℃, the entire baking time is about 30 hours, Until the husks harden in the baking room. After baking again, after the longan dried for the first time, the internal moisture of the fruit kernels and pulp gradually diffuses outward, and the surface of the pulp is wetter than immediately after baking, and must be baked again. At this time, the dried longan can be divided into 2 grades, large and small, and baked separately. The re-baking method is the same as the initial baking, the temperature is controlled at about 60 ° C, and the baking time is about 4-6 hours. Generally, the longan can be baked again until the fruit stalks are gently pushed with fingers to fall off. At this time, the flesh appears fine wrinkles, dark brown, and the surface is dry. There is no juice flowing out with the pressure of the fingers. The core of the bite is easy to crack, and the cross-section is plant-gray. Cut the pedicle. After the first and second fruits have been roasted for three times, the stems are cut flat with scissors. Drying standards and quality requirements. Drying standard: The fruit shell can be flattened by light pressure, the flesh is dry and russet, shiny and wrinkled, the core of the fruit is easy to crack with teeth, and the section is gray. Quality requirements: longan of the same grade should be dry and uniform, the fruit pedestal should be complete, the appearance should be smooth, the flesh should have no burnt smell, no mildew, no moth, and the shell breaking rate should not exceed 5%.

    • Application of air energy dryer in baking bergamot
      Application of air energy dryer in baking bergamot
      2017-12-03

      Overview of bergamot drying: The bergamot has a long history of cultivation in China. It is mainly produced in Zhaoqing, Gaoyao, Deqing, Yunfu, Sihui, Yunan and other places in Guangdong. Produced in Sichuan, called "Sichuan Buddha". Produced in Zhejiang, called "Golden Buddha Hand". In addition, Guangxi, Anhui, Yunnan, Fujian and other provinces have also been cultivated and produced. The bergamot is based on Guangdong products, with good quality and quality. The processed product "Phnom Penh White Meat" enjoys a high reputation in domestic and foreign markets. It is one of the "Top Ten Guangdong Medicines" of Guangdong's authentic herbs. Bergamot drying process: In the first stage, the temperature is set to 63 degrees in 2 hours, which plays a role in killing blue and fixing color, and does not drain moisture. The second stage is 5 hours, the temperature is set to 55 degrees, the process of the host starting drying + dehumidification, dehumidification must also ensure that the temperature is constant, otherwise it will affect the quality and efficiency of bergamot drying. The third stage is 1-2 hours, the temperature is set at 65 degrees, and the humidity is low at this time, and it can be set to regular dehumidification. Service commitment: The warranty period is one year after the equipment is shipped to the buyer. During the warranty period, no matter what kind of parts are damaged, we will provide them for free and provide free services. Lifetime tracking service. For the equipment with more than one year warranty period, only the cost of parts will be charged for the replacement of damaged parts, and free services will be implemented. Tailor-made + long-term tracking service + on-site installation and commissioning + one-year quality package + lifetime maintenance If you want to know more about the sausage dryer in detail, you can contact us as soon as possible. We will pass the information of dryer ** to you and we will give you a satisfactory answer. Can evaluate design schemes and benefit analysis for customers free of charge, can be used for energy management cooperation, welcome to consult, visit customer cases, Shanghai Jibei Air Treatment Equipment Co., Ltd. We are here to help you, please dial the number below! Jibei will work with you to create a better tomorrow! Mutual benefit and win-win situation!

    • Application of air energy dryer in drying lily
      Application of air energy dryer in drying lily
      2017-12-03

      Basic introduction of lily: Lily is a perennial herb bulbous plant, mainly distributed in the temperate regions of eastern Asia, Europe, North America, and other northern hemispheres. There are more than a hundred species found worldwide. China is its main origin and is a natural species of lily Distribution center. There are about 100 species of lily plants in the world, of which 55 species are native to China. In recent years, many new varieties have been produced through artificial hybridization, such as Asian lily, musk lily, perfume lily and so on. The main application value of lily is ornamental, and some varieties can be eaten as vegetables; China's Lanzhou lily, which is famous for its edible value, has been recorded in Pingliang County, Gansu Province for more than 450 years. At present, edible lilies are widely planted in Qilihe and other areas in Lanzhou, and enjoy a high reputation at home and abroad. Lanzhou lily is large and sweet. It can be used as a snack or as a dish. Lily soup made from the lily of the valley in Yixing is the best summer heat. Lily can also be made into dried lily and lily powder, which are very expensive in the international market. So far, lily is still a commonly used medicinal material in Chinese medicine. Traditional Chinese medicine believes that Lily has a slightly cold level, which has the effects of clearing fire, moisturizing the lungs, and soothe the nerves. Its flowers and bulbous stems can be used as medicine. Selection of lily raw materials: Choose white, large, tightly packed lily bulbs, remove "thousand-word heads" (that is, small and many bulbs, small scales and not tight), worms, yellow spots, mildew, and redness of the epidermis Lily; use a sharp knife to remove hair roots to remove soil impurities and skin aging petals; divide the peeled petals into three levels of large, medium and small (the ratio of large to small is 4: 5: 1), and then select and arrange the fresh lily Large, medium and small orders are rinsed 2-3 times with water. Lily drying sequence: fresh lily bulbs → material selection → cleaning → peeling and color protection → hot soup to eliminate enzymes → cold water rinsing → drain the surface moisture → load into a special lily pallet truck (divided into about 6-10 layers) to advance drying Room → hot air circulation drying → selection and classification → packaging → sealing → storage → finished products. Lily drying process: 1. Selection of materials for cleaning. Selection of one hundred raw materials weighing more than 150 grams, individual hypertrophy, fresh, no discoloration, no moth, no damage, high quality. Wash the sand and impurities on the surface of the bulb with water. 2. Peel color protection. First remove the old scales and stem chassis surrounding the lily, then peel the scales and classify them according to different sizes, and then put the color protection solution in time to prevent the scales from browning under the sun. 3. Scalding enzymes. The hot-scalding enzyme is generally carried out in a tiltable stainless steel open pot, and the amount of water added is 4 times that of the scales. The amount of lily scales should not be excessive, otherwise the heat will be uneven. First turn on the large steam to boil the water in the pot, then put the scales in and mix well. When you find that the water in the pot is boiling for the second time, you should immediately remove the scales. The operation of scalding enzymes must be well grasped. If the temperature and time of scalding are not reached, the scales will oxidize and brown during drying. If the scalding is overheated, the scales will burn out. After drying, the scales will easily break or form fish scales. The color is deepened. 4. Rinse in cold water. Immediately put the hot scales into running cold water to rinse them, and then remove the drained surface water. 5. Hot air drying. Pour the drained scales into a baking dish, spread them evenly, install them in a drying car, and push them into the drying equipment for hot air circulation drying. The temperature is controlled at 60-70 ° C, and it is turned over once an hour, dried to a scale with a moisture content of about 10%, and the scales are brittle by hand. 6. wrap up and store. Immediately after classification, the package was sealed and placed in a cool and ventilated warehouse to prevent worms and mildew.

    • Calculation method of humidification amount
      Calculation method of humidification amount
      2017-05-17

      Air humidity is ubiquitous, especially in the industrial field. Each industry has its own unique production requirements for indoor humidity. Therefore, various types of humidification equipment are used in textiles, papermaking, computer rooms, electronics, spraying, plastics, gunpowder, printing, tobacco, HVAC , Fresh storage, food, artificial landscape, planting, aquaculture, laboratory and other industries have been widely used. Current applications * are mature * for a wide range of humidifiers are wet film humidifiers and ultrasonic humidifiers. How do users choose a configuration when configuring a humidifier? This mainly depends on how large the humid load is in the humidification place, which is the amount of humidification we often say. This article mainly introduces the calculation method of the humidification amount. The user can apply this method to calculate the humidification amount required by himself according to his actual situation, and purchase the humidifier model from the determined. Calculation formula: H = volume × ρ × temperature coefficient × (X2-X1) ÷ 1000 × ventilation times × loss coefficient Explanation: H——required humidification (kg / h) ρ—air density (kg / m3) = 1.2V——volume (area of humidified area × height) 1000——g converted to Kg loss coefficient—1.2, including space personnel, environmental sealing effect and materials and other factors—the number of air changes—usually 2-3 times Temperature number system-1.2, increase in winter, decrease by 1.2 or lower in summer X2- X1-moisture per cubic meter, X2 is after humidification, X1 is before humidification Example 1: space volume 20000m2 × 2m high, ambient temperature 20 ℃, relative humidity 70% required to increase to 90% of the amount of humidification kg / h? We first calculate X2 = 15.60135 g / m3 x1 = 12.113438 g / m3 and then substitute the above formula to calculate the required humidification amount: H = 20000 × 2 × 1.2 × 1.2 × (15.60135-12.13438) ÷ 1000 × 3 × 1.2 = 718.91 kg / h Example 2: Space volume 400 m2, height 2 meters, ambient temperature 20 ℃, relative humidity 70% required to rise to 90% How much humidification kg / h do we need? We first calculate X2 = 15.60135 g / m3 x1 = 12.113438 g / m3 and then plug it into the above formula to calculate the demand. Humidification capacity: H = 400 × 2 × 1.2 × 1.2 × (15.60135-12.13438) ÷ 1000 × 3 × 1.2 = 14.38 kg / h Then we can choose an ultrasonic humidifier with a humidification capacity of 12kg / h. If you choose The humidity humidifier should be equipped with two 12kg / h machines, because the humidification time of the wet film humidifier is long and the loss is large.

    • Why does tobacco need a humidifier?
      Why does tobacco need a humidifier?
      2017-05-17

      Humidifier selection principle for tobacco factory Plant features: The workshop machine has a large amount of heat, tobacco leaves and shreds have high requirements for humidity, general humidity φ≥80% RH humidification process requirements: winter: hope for isothermal or warming humidification spring and autumn: hope for cooling and humidification Summer: I hope the choice of cooling and humidifying humidifier: use dry steam humidifier in air conditioning unit in winter, use wet film evaporative cooling humidifier or spray room humidifier in air conditioning unit in spring and autumn, use wet film evaporative cooling humidifier in air conditioning unit in summer Or the spray room is humidified, and when the humidity of the supply air cannot be satisfied, the humidification is directly used in the plant (usually a centrifugal humidifier). 1. Does the tobacco classification plant need to be humidified? In the tobacco production process, in order to improve the grade of cut tobacco required for the production of cigarettes, the tobacco leaves need to be classified before processing. Because the tobacco leaves become very dry after re-baking, the tobacco leaves are particularly fragile, and the flying dust phenomenon is more serious during the classification of tobacco leaves, which will cause harm to the human body and cause economic losses. A cigarette factory in Yunnan once conducted a simulation test in a workshop to control the humidity of the workshop at about 80% RH. In this way, the damage rate of tobacco leaves can be reduced by more than two thousandths. Loss of four million yuan due to broken tobacco. It can be seen that humidity control plays an important role in the production process of cigarettes. 2. How to humidify the tobacco classification plant without central air conditioning? Because many tobacco leaf grading plants are only used within a few months of a year (how many in Yunnan are in September-October), many plants do not have central air-conditioning installed, but only install a number of exhaust fans in the plant to perform indoor air fresh air replacement.气 处理。 Gas processing. In this environment, if the indoor temperature can be maintained, the smoke and dust will be greatly reduced, and the tobacco crushing rate will be greatly reduced. Under these conditions, we suggest: 1. If the tobacco leaf classification plant has a large area and the tobacco plant already has a large air compressor station, the gas-water mixed humidification scheme is preferred. For details about the gas-water mixed humidification scheme, see Beijing Hanning Air Technology. Humidification Engineering Manual. For the advantages and disadvantages of air-water mixed humidification scheme, please refer to "Comparison of Several Humidification Methods". 2. If the area of the tobacco leaf classification plant is small (area less than 200 square meters), please choose the centrifugal humidification scheme. For details about the centrifugal humidification scheme, please see the "Centrifugal Humidifier Sample". For the advantages and disadvantages of centrifugal humidification solutions, please see "Comparison of Several Humidification Methods". 3. How to humidify the tobacco grading plant with central air conditioning? For a tobacco leaf classification plant with a central air conditioner, in winter or spring and autumn, users can choose a humidification scheme in the air conditioning unit (generally this scheme has a smaller investment), such as a wet film circulating water humidification scheme, high pressure spray + wet film baffle plate humidification Scheme or dry steam humidification scheme. However, it should be noted that the temperature of the air supply in the summer is low (generally, the air supply temperature is about 12 ° C). At this time, no matter what kind of humidification method is adopted in the air conditioning unit, even if the humidification reaches a saturated state, it cannot meet the indoor temperature of 20- Air condition at 24 ℃ and relative humidity 70-80% RH. Under these conditions, the scheme of direct indoor humidification must be used to achieve the above requirements. Summer humidification of the cigarette factory silk warehouse 1. Does the cigarette factory silk warehouse humidify? In the process of making tobacco, the damage rate and quality of cut tobacco has an important relationship with the humidity of the air during storage. When the air is too dry during storage, the cut tobacco is easily broken into smoke, and the odor is volatilized, which reduces the quality of the cut tobacco. Generally, the temperature of the silk storage needs to be maintained between 18 and 25, and the relative humidity must be maintained above 70% RH. Under this environmental condition, the shredded tobacco is not easily broken, the dust phenomenon is lighter, and the smoke taste is more pure. The relative humidity of the air in the general silk storage is difficult to meet this requirement. Therefore, in order to improve the quality of cut tobacco, the storage tank must be humidified. 2. Why is the humidification of the silk warehouse of the cigarette factory based on central air conditioning in summer impossible? When it comes to humidification, many people think of using a central air conditioning system for humidification! In winter, the use of a dry steam humidifier in the central air-conditioning system can achieve the required relative humidity in the silk storage, but in summer, because the temperature in the silk storage is too high, the central air conditioner must send cooler cold air to make the silk storage. The temperature in the storage room has decreased (generally maintained at about 24 to 26 ° C). At this time, no matter what kind of humidification scheme is used in the central air conditioner, even if the relative humidity of the supply air is saturated (100% RH), it can be caused by the supply air. The water content is small, and the relative humidity decreases due to the temperature rise after entering the silk storage, which causes the relative humidity in the silk storage to still not reach 70% RH. Conclusion: When the temperature of the central air conditioner is too low in summer, no matter what kind of humidification method is used in the central air conditioner (such as dry steam type, spray room type, high pressure spray type, etc.), it cannot meet the 70% RH of the silk storage. Storage silk * best humidity requirements. 3. The best summer humidification scheme for the silk storage in the cigarette factory. Since the silk storage of the cigarette factory in summer cannot rely on central air conditioning to meet the silk storage requirements, people must directly humidify the silk storage to achieve the purpose! l Generally speaking, people do not adopt the method of directly spraying steam in the silk storage, because this will not only cause a significant increase in the temperature in the storage, but also cause a series of problems such as condensation and dripping on the top of the storage, and moisture falling off the wall! l From the perspective of reducing the cooling load of the refrigerator, we recommend the use of cooling methods such as centrifugal humidification, air-water mixed humidification, or high-pressure micro-mist humidification! For the performance comparison of several humidification methods, please refer to the appendix "Comparison of Several Humidification Methods". Generally: a) The storage area of the silk warehouse is less than 200 square meters. It is recommended to use a centrifugal humidification scheme. Air-water mixed humidification scheme; c) When the storage area is> 300㎡ and there is no compressed air station, it is recommended to use high-pressure micro-mist humidification method.

    • Why does a printing plant need a humidifier?
      Why does a printing plant need a humidifier?
      2017-05-17

      Why is the printing shop humidified? Air humidity, like temperature, is an important factor in air conditioning. All substances should hold enough water. Too dry environment, the air will absorb water from the material, otherwise the material will absorb water from the air to ensure the moisture balance between the materials. In the production process of the printing industry, it is particularly necessary to ensure sufficient humidity. Why do we need to humidify it? What is the best printing result when the humidity is maintained? Reasons for humidification of printing workshop: Generally, the temperature of printing workshop is: 20 ~ 22 ℃, relative humidity is 45 ~ 60%. At present, some outstanding printing companies in China not only adopt reasonable temperature and humidity control for the printing workshop, but also make strict requirements on the temperature and humidity of the paper warehouse: 18 ~ 20 ℃, 60 ~ 65% RH to ensure that the paper before entering the printing workshop There is sufficient moisture content to eliminate the hidden dangers of paper deformation. 1: Eliminate static electricity. Paper is prone to static electricity. Staff often have a sense of electric shock and are accompanied by static beatings, especially in the dry season of autumn and winter. The strength of static electricity is closely related to the ambient humidity. Static electricity is active at a relative humidity of 30%. The lower the humidity, the more active the static electricity is. It gradually weakens with the increase of humidity, and basically disappears in a humidity environment above 50%. 2: Avoid wrinkling. The cause of paper wrinkling is due to the phenomenon of "ruffled edges" or "tight edges", which makes the paper unable to stretch flat and wrinkles during printing. This phenomenon can cause a large amount of scrap in the printer. 3: Prevent telescopic deformation. Due to the different types of paper, the expansion and contraction rates are different. If the paper and the environment cannot reach the humidity balance, it will cause the following conditions: the paper absorbs moisture and expands, and loses moisture and shrinks. When the deformation is serious, the monochromatic printing machine cannot overprint, and the multicolor printing will also cause one-color-to-one-color elongation in sequence, or the dragging part will have a "swing angle" on the fan surface, causing the overprinting or the front and back sides to be misaligned due to stretching, or The printed paper has different stretching, which brings a lot of trouble to the next processing process. 4: Reduce paper dust. Paper dust contained in paper and dust contained in air are flying everywhere in a dry room, which have different degrees of influence on the quality of printed matter. When the humidity in the room exceeds 50%, all kinds of dust flying floc absorb water and become heavy. In response to this situation, Shanghai Yingtai Environmental Engineering Co., Ltd. has developed special humidifiers for printing plants and printing industries. Industrial ultrasonic humidifiers, high-pressure micro-mist humidifiers, wet film humidifiers, steam-water mixed humidifiers, dry steam humidifiers Maintain humidity to ensure that the paper does not shrink and deform, does not jam, has no defective products, is easy to register, does not stop, does not waste paper and time, improves production speed, greatly improves the rate of increase, and increases revenue.

    • Application of computer room humidifier
      Application of computer room humidifier
      2017-05-17

      Computer room purification humidifier, also known as computer room purification humidifier, is based on the wet film cabinet type computer room humidifier based on the addition of independently controllable purification function modules, the use of single-chip microcomputer control technology, software and hardware redundancy and fault-tolerant design, functional modularity Design, controller Chinese LCD display; more functions, easier to use. Computer room purification humidifier is mainly used in commercial and industrial areas such as communication room, switch room, network room, server room, power room, office, computer room, archive room, gym, reading room, electronic precision processing workshop, etc. Purification. Working principle ◆ Foul air enters the coarse effect filter, and particles with a particle size of more than 10 microns are intercepted. ◆ Air enters PC gas filter, and formaldehyde, benzene, ozone, nitrogen oxides and other harmful gases in the air are adsorbed. ◆ The preliminary purified air passes through a wet film that is wet with water, and water molecules absorb the sensible heat in the air and evaporate to form humid air. ◆ The air entering the EC electronic dust collection unit is further purified and the bacteria in the air are killed. ◆ The thoroughly purified air carries negative ions and is sent back to the room by the purification humidifier. ◆ Optional ** photohydrogen ion purification unit; effectively kills harmful microorganisms and decomposes volatile organic matter. Operational features 1. Purification, cleansing and humidification ◆ Molecular-level volatilization technology, no white powder phenomenon Automatic renewal at regular time ◆ High-voltage static damages the nucleus of microbial cells, making them inactive and sterilized. ◆ Filtering and electronic dust removal technology is used to remove particles as small as 0.01 microns. ◆ Unique impregnation technology, ** purify various harmful gases such as formaldehyde, benzene, ozone, nitrogen oxides, etc. ◆ Can generate negative ions, eliminate human fatigue, make the room air more fresh and comfortable ◆ Adsorption through long-term filter and activated carbon 2. Comprehensive leak-proof safety guarantee ◆ The water inlet dual solenoid valve is independently controlled to ensure the tightness when the water inlet is closed; ◆ The main water tank of the equipment uses a reliable float to detect the water level, and a double float redundancy design is made; ◆ The leak and overflow standard transmission Sensitive and audible water leakage alarm control to cut off the water source; ◆ The device comes with a large capacity water tank, which is used in the space where the water source is inconvenient. ◆ Water pipe and control interface are ** space interface, ◆ Automatic water supply standard water tank automatic cleaning function, wet film medium self-cleaning function ◆ Automatic water shortage protection function, pump operation is controlled by water tank water level sensor 3. Humidifier Intelligent control ◆ Equipped with a humidity control system, the adjustable range of humidity is 20-90% ◆ Fully automatic microcomputer control to achieve automatic function. ◆ With fan operation mode setting function, high-speed wind, medium-speed wind and low-speed wind control can be set. ◆ Status prompt, fault alarm, humanized equipment; ◆ Automatic water supply standard water tank automatic cleaning function, wet film medium self-cleaning function ◆ Automatic water shortage protection function, pump operation is controlled by water tank water level sensor ◆ Humidity free setting Set and display the actual ambient temperature and humidity. ◆ Temperature and humidity on-site calibration function ◆ Automatic water shortage protection function, pump operation is controlled by water tank water level sensor

    about us
    Product center
    Service Center
    CONTACT
    contact us
    • Sales Hotline: 4008-829-816
    • Company email: jibei118@sina.com
    • Address of Company: A3-2016, Lane 1588, South Wangyuan Road, Fengxian District, Shanghai
    You are the 56457 visitor!